Others
Others
Home > Others > Controller >    SP103E Mini-RF controller

SP103E Mini-RF controller

Application:

1.  DMX LED products.
2. LED pixel light,led pixel module.
3. LED strip,led light bar.

4.Outdoor Lighting Engineering.

Email: [email protected]



Share to

Facebook Twitter g+

Specification

Features:

1. RF Remote control,long distance,mini size,wire connection is simple and very easy to use;
2. Support almost every kind of one-wire or two-wire LED-DRIVER-IC ;(Can be customized)
3. With 300 kinds of patterns,which are vivid and beautiful;
4. Each controller can control up to 2048 pixels;
5. With user setting saving functionality;
6. Brightness adjustable.
7.Preventing reverse connection of power supply.

 Remote Controller

1. Functions Of Each Button:


Usages:

Testing
Continuously pressing the AUTO button 5 times until LED is off, release the AUTO button to into the mode of switch in
red,green,blue,yellow,purple,cyan and white,witch can test the your LED.
Matching
Continuously pressing the MATCH button 5 times until LED flash in white quickly to match the Remote control with the
receiving controller.Pressing the MATCH button for 5 times till LED flash in white slowly to un-match;
Reorder RGB
Differ from kinds of LED, The R G B keys may don’t perfectly match to your LED,Reorder them if needed. Continuously pressing the
SETTING button 5 times until LED flash in white once and then turn into all white,Pressing the R button until LED is red, Pressing the G
button until LED is green, pressing the B button till LED is blue, then press the SETTING button once to confirm your setting;
Adjust Num of pixels
The factory default setting of the number of controlled pixel is 600. Continuously pressing the SETTING button 5 times until
LED flash once and turn all white, pressing MODE+ to add pixels ,pressing MODE- to decrease pixels,(each pressing add or decrease
60 pixels) then press the SETTING button to confirm your setting;Can be regulated to up to 2048 pixels,The minimum number is
300 pixels.
Catching
When in theAUTO mode, pressing the SETTING button once,and then press MATCH button once to catch the Current pattern to stay and
operate circularly.


Receiving Controller: 
● Can be customized to support almost every kind of one-wire or two-wire LED-DRIVER-IC;
● The receiver controller has two kinds of working voltage :5V-supply-voltage or 12V-supply-voltage;
● Cautions: Please make sure the power supply voltage is match to your controller before you power it.


二维码

Email: [email protected]
WhatsApp: 0086-138-0255-3087
Skype: ipixelled

Copyright © 2016 iPixel LED Light Co.,Ltd
版权所有:深圳市像素之光科技有限公司  

 备案号:粤ICP备16048450号   备案图标.png粤公网安备 44030602006908号