83X83 Led Rigid Panel

A new led rigid panel, produce it according to our customer's requirements. PCB size: 83x83mm 15LEDs/pcs PCB color: black no writings needed 5050 LED chip, RGB color, but only light up Green and Red, blue don't need.

RGB LED Matrix

This is another RGB LED Matrix ——PL-RM5050F18V12 we designed for customer. PCB size 40mm width*80mm Length by LED Pitch 13.3mm with 18pcs,SMD 5050 RGB LED ,drive by 1 pcs UCS1904 IC ,DC12V.Button side there are 2 soldering pad input and output . There are 2of 4mm diameter Hole are for installation use. It allows to drill screw or any other as you want,thickness of PCB 1.5mm.

A Small Digital Panel

Single color LED Rigid Panel

There are three sizes: 27*27cm, 81 pcs SMD3528 cool white LED, DC12V. 27*9cm, 27 pcs SMD3528 cool white LED, DC12V. 9*9cm, 9 pcs SMD3528 cool white LED, DC12V. It's used indoor,so the PCB is IP20.

Full Color LED Rigid Matrix

This is WS2812b addressable led rigid matrix. PCB size is 457.5mm Length*213.5mm Width, pixels pitch is 30.5mm with 15*7=105leds total. DC5V. we solder the 3pin white waterproof connectors in each side. extra 2 pcs 2pin power wire to re power.

DMX Panel Light

DMX panel light is the new generation of the disco era. This panel used DMX512 Chip, size:300*150mm, 12*6 SMD 5050 RGB LEDS. The DMX Panel light can be controlled by DMX controller. Online control - create and playback effects LIVE with use of computer

LED Panel Light for Dance Floor

This is a new project from India, they are looking for led panel to work a dance floor.As our discussed, we will re-design a new panel as their need. Their dance floor with 500pcs modules, each module with 500x500mm. we produced the this panel with

Led project about WS2812B DC5V 10*10 leds rigid matrix in UK

This was a project from one of our England customers who customized a matrix in 2018. our customers changed the plan many times,finally they decided to use 100led 16*16mm panels with black pcb,the pixel pitch is 16mm,

10*8 Pixels Rigid Matrix

There are 80pcs SMD5050 4000-5000K LEDs ,each LED is drived by WS2812B Chip. 4 pcs matrixes make a LED screen.Soldering connectors are on backside of PCB. It will be more easy for install.

Customized Trapezoid LED Rigid Panel

This is a project from France, they will use the rigid PCB board, but these PCB not square, not rectangle, but trapezoidal. They asked use 5630 4000K CCT LED chip, each panel have 7x4=28LEDs, DC24V, 8W.the size is 10x12.5x18(high)cm, and this PCB board with aluminum materials, 1.5mm thickness,it will be more good

Addressable WS2812B LED Ring

This is customized product by one of customers Diameter: Outer 126mm ; inner 108mm, 40leds per piece DC5V IP20. black pcb

16*60 LED Matrix

This is a large WS2812b led matrix we designed for customer the whole size is 240mm*900mm in P15mm, total Pixel (16*60) we soldered 2 pcs 240mm *450mm it makes easy installation when you're going to use