A new meteor tube project, an old customer from UK. This tube with 1360mm long, 15mm tube diameter,84pcs addressable SK6812 LEDs,and single side PCB.The both end don't need cap to seal the tube and signal direction is from top to end, then to top,but our customer asked only weld a 4pin connector(Din, Dout, GND,DC5V+) on the top side,that means the front side solder 3 wires(Din GND,DC5V+), and back side solder a Dout cable.
READ MORE →
Internal code: 61100066 New customized led rigid panel Part Number: PL-S36SK6812RGBW Addressable RGBW SMD5050 led rigd matrix 19.2 x 19.2cm, Pixel pitch 3.2cm, 36LEDs DC5V, White PCB, 4 mounting hole, with molex connector back side
READ MORE →
Internal code；51200626 this led strip is customized by one of our UK customers 5050 RGB+Indigo (450NM) LED strips light, 60LED/m,30pcs RGB+30pcs Indigo, DC24V, 14.4W/M, PCB width: 10mm, PCB color:Black Non-waterproof IP20, 600mm cables on each end
READ MORE →
This is a new project from France, it's auto control led snowfall tube.cold white, double side PCB (30 leds/side), 0.5 m length, 30 mm diameter tube, 2835 led chip,DC24V, 8W/pcs, wed male connector each tube with a IC chip, don't need controller, auto control directly. and the effect like meteor shower landing.
READ MORE →
Internal code: 40100092 Customized 30cm diameter led round panel Part Number: PL-F3006812V5 round rigid RGB LED Disk, SMD5050 addressable SK6812 LED, diameter: 300mm, DC5V, 675LEDs/pcs, black PCB
READ MORE →
If you never think out of the box, you will not get a innovation. Most products have several standards. We have the 30leds/m,60leds/m and 144leds/m apa102 strip.The PCB board width is 10mm or 12mm. One day an Amarican customer asked whether we can help to do a customized prodcut. He will use them in a special project. In his requirement,the PCB board need be narrower ,only 9.5mm or less,and each meter has 39leds.Each piece will need 91 leds. In the two end of the strip,only board not leds.
READ MORE →
Internal Code：51100009 160pcs SMD5050 360 View LED Tube, 80 Pixels DMX 512 control, DC12V, Size: 1000*30mm, Waterproof IP65, Black PCB. This differs from our standard DC12V 30mm tube in that it is individually controlled for each LED.80pcs LED, 80pcs pixes.
READ MORE →
40x45cm PCB led board DMX panel with rubber feet on the bottom. We wil do the 5 pin ( Power & Signal ) cable as a plug in not soldered. Connectors on both input and output. Part number : PL-RM5050DMX56V24 Voltage : DC24V Power : 18W/pcs Led quantity: 56leds/pcs (Cree 5050SMD) Size : 400x450x1.5mm
READ MORE →
This is a another OEM 2812b led strip for our clients from Ireland total lenth is 200.1mm with 29 pcs ws2811 IC built in 5050 RGB led black color pcb in 12mm width, looks like a very simple item but the input side soldered 470 OHM resistors and 1000uF capacitor (Panasonic) to make the voltage and signal stable in application 1m cable as a tail for connection ,obviously ,it's for some special project.
READ MORE →
DC12V192LEDs/m SMD5050 360 View LED Tube, DMX 512 control with 32 Pixels, PCB Color: Black PCB Length: 0.5meter/1meter/2meters Color: full color waterproof IP65
READ MORE →
This is a simple RGB disk / round matrix Diameter 270mm, 150 pcs LED, LED pitch 16.66mm there are 4 mounting hole spreading on the panel no soldering pad except 2 pcs Molex Male connector white color painted on Fiber PCB,it's quite easy to be distortion after the board pass Reflow, so we made the thickness 1.5mm
READ MORE →
This is the latest digital light bar ,we just made some samples for our client it's in DC24VCC and 8Pixel with 48 LEDs only , in the begining of each bar we put a component for safe ESD protection DATA in wires and
READ MORE →
Email: [email protected]
WhatsApp: 0086-138-0255-3087
Skype: ipixelled
Copyright © 2016 iPixel LED Light Co.,Ltd
版权所有：深圳市像素之光科技有限公司
备案号：粤ICP备16048450号
粤公网安备 44030602006908号
