Internal code: 40100147 This led rigid bar is DC12V, 24W/m, size:1000*14mm. We use the GS8208IC that has the function of resume from break point, which means if any of chip broken, the others will not be affected and the signal can be transformed as usual. What’s more, it has 32 different program pattern inside which can help you test before installation.
READ MORE →58 PCS SK6812 SMD5050 LED Rigid matrix. Size:56*80mm; Watt:14.5W; Voltage:DC5V. PCB Color :Black; Connector:PH2.0mm SMT connector. PS:We love to share it but we don't sell this item as it's OEM.
READ MORE →As you can see all of Waterproof LED strip made by clear silicon tube or Silicon / epoxy surface glue they are pretty good but if the project not allowed to see the LED chip, then this milky white tube can be a good choice as it's much cheaper than LED Neon flex and lighter the size is below as the drawing
READ MORE →internal code: 40100148 It is DC5V SK9822 pixel pitch 7mm addressable LED rigid bar. The PCB size is 850*12.7mm. There are 115pcs leds on the PCB.
READ MORE →Internal code: 51300053 It's a custom led round pane with 180mm diameter, made by SMD3535 RGBW 4 in 1 LED chip, DC24V, in order to achieve better cooling, we used aluminum PCB board + heatsink each panel.
READ MORE →This pixel tape has 8 pixels on one meter and each chip drive 6pcs single white LED looks like we just changed the LED compare to the normal tapes but take a look on the PCB pad, there are two Data on there !! it's a new chip with R,G,B thress channel and two data line, one is spare line so when one of IC driver burned, the rest of chip and LED will keep the strip working
READ MORE →it is SMD5050RGB WS2812BIC control rigid strip Led pixel pitch approx 15.87mm (± 2mm ) DC5V input , Black 10mm PCB board #20AWG 3Pin JST 8cm long cables
READ MORE →Part Number: M479540CA4SA1 Diameter: 479mm(outermost ring) Voltage: DC5V LED Qty: 540pcs SMD 5050 RGBW (6000-6500K) IC Type: SK6812 PCB Color: black PCB PCB Width: 40mm Non-waterproof IP20, 3pin male/female connector Power: 60w/pcs Welcome to contact If you have any new ideas.
READ MORE →It's third new customized product from US client. Same as last order. 8mm PCB Width and 80px/m also need thermally conductive adhesives to offer heat dissipation. We rotate the LEDs by 90 degrees and the pins are not near the edge of the board to achieve 8mm width. While soldermask with oval pads between each led and black silkscreen lables on the top at this order.
READ MORE →Internal code;51400005 This is a new custom product from Poland. It's for a bridge. The details as below: DMX512 IC SMD5050 RGB+4000K CCT 48LEDs & 8Pixels per meter DC24V, 12-14W/m IP67
READ MORE →Internal code:51300047 We have more size of the WS2812B type such as: 8x32/8x8/16x16 Here information about the new panel : Part Number : M080440CA3SA5 Pixel pitch : 10mm; Voltage: DC5V; Leds : 8 x55 pixels; PCB : black ;
READ MORE →Our client need full-color DC12V RGBW led strip. Customer only need digital led strip,not addressable. This digital led strip is 60 pcs RGBWW(2800-3200K) led per meter,three leds one group, and each group with a UCS2904 IC. 19W/M, PCB width: 12mm. If you have special idea, welcome to contact us.
READ MORE →
Email: [email protected]
WhatsApp: 0086-138-0255-3087
Skype: ipixelled
Copyright © 2016 iPixel LED Light Co.,Ltd
版权所有:深圳市像素之光科技有限公司
备案号:粤ICP备16048450号 粤公网安备 44030602006908号