This new product is for our Australia client. It is composed of two parts to be a rectangle that can be used in the machine. One part is a LED bar with DC12V 33pcs RGB LED. The Size is 564.6*10*1.6mm There is a Molex connector in the middle of the pcb.
READ MORE →
this is 80mm dameter rgbw tube which customized by one of our UK customized product number : B080108CC4LZ Voltage : DC24V led chip : 5050 RGBW(4000K) Led amount : 144leds/m length of cables : 6500mm you also can customize different length of tubes , such as 678mm 759mm 840mm...
READ MORE →
This is 50mm dameter pixel tube which customized by one of our US customer, it is DC24V,but 3led as a group,120led per meter, and input / output connectors on the same side , and it is 2438. 4mm per pcs, but still don't have shadow. If you have any idea,pls contact us
READ MORE →
This is a French client customized led bar. - DC12V,27W/pcs - L 1424mm* W 40mm *H 1.2mm - 330pcs SMD2835 LED - 6000-7000K ( pure white) - Aluminum/FR4 PCB - 4pcs 1cm diameter install hole - 1pcs 2061 led terminal connector - 50cm 2Pin Red/Black cable at input side Welcome to share us your ideas!
READ MORE →
Before we just have 1m DMX led tube,so only can do 1m ,2m length, here attached our standard product link:http://www.jietw.com/index.php?id=144 now we only change the length ,it is DC12V 24leds with 8 pixels, so we can do 0.5m,1.5m even 2.5 m. welcome to share us your great idea!
READ MORE →
This is a new custom product from one of our client. they did the single color Cree high power rigid PCB before, and now they ask to do RGB one. We used 3535 high power LED chip, each PCB has 12LEDs/pcs, 28W, DC24V. Each LED chip with a lens,the light beam 10x45 degree,PCB width is 760*24*14mm, there has 4pcs*5mm diameter holes for you to installation, both end with 2pcs*2 hole wago connector. Just in case your have any new ideas, feel free to contact us.
READ MORE →
3535 high power Cree LED chip, each PCB has 12LEDs/pcs, 28W, DC24V. Each LED chip with a lens; Beam Angle:10x45 degree; PCB size :760*24*14mm; Mounting holes:4pcs*5mm diameter.
READ MORE →
LED Quantity: 60LEDs/m Voltage: DC12V, LED color: White LED chip : SMD 2835 PCB width: 8mm Non-waterproof IP20, 2pin male/female connector The led strip has two positive terminal at one end and two negative terminal at the other Welcome to contact us If you have good new ideas.
READ MORE →
This is a new custom product from one of our client,they done 10led/pcs with Molex connectors (2.54 pixel pitch) before,but now they ask to do 12led per pcs. This one we use APA102 led chip,not SK9822,and the size is 435*14mm, there has 4pcs*5mm diameter holes for you to install that,both end with 2pcs*4pin Wafer curved needle connetor,but the pixel pitch(connector) just has 2mm. If you have any new idea,pls let us know freely.
READ MORE →
We have the led wall washer be R G B version(12pcs R, 12pcs G, and 12pcs B), 36LEDs/m, DMX signal, it's made by Cree single color LED chip. but now our customer wants to use the R G B 3 in 1 LED chip with power of 36LEDs/m & 36W/m, without DMX or other IC chips, and We can use different lens angles,10 * 45°,25°, 45°,60°, etc
READ MORE →
This custimized DMX led tube is based on our standard led tube: http://www.jietw.com/index.php?id=142 We only changed the RGB led chip into RGBW for our Croatia. It is φ30mm DC12V 96leds/m with 16pixels. Welcome to share us your grear idea!
READ MORE →
It is DC24V, 25W/pc, IP20. There are 4 installation holes on the PCB.
READ MORE →
Email: [email protected]
WhatsApp: 0086-138-0255-3087
Skype: ipixelled
Copyright © 2016 iPixel LED Light Co.,Ltd
版权所有：深圳市像素之光科技有限公司
备案号：粤ICP备16048450号
粤公网安备 44030602006908号
